Vintage Motorcycles

Vintage Motorcycles

Clive Brown rides with history

  • Feb. 5, 2020 7:30 a.m.

– Story by Maggie Jackson Photography by Don Denton

Clive Brown, owner of Pizzability on the West Shore, loves buying, restoring, fixing and riding vintage motorcycles. His garage and basement are filled with vintage bikes. The wall of his garage is lined with Iron Butt Association certificates, a few earned while riding his classic bikes. “You must complete a 1,000 mile (1,600 km) in 24 hours ride, fully documented with receipts etc. with a witness to sign the paperwork at the start and end of the ride, before you do any of the extreme rides” Clive explained. “I think I have about 40 certificates, including numerous extreme and theme rides.”

Clive has always loved vintage motorcycles. “When I was six, I found my grandfather’s Rudge in the garage. I was in awe of all the controls. It was so big and huge and screamed adventure. I wondered what my grandfather did on that motorcycle; where he went and what he saw.”

When he was eleven, Clive’s dream of owning a motorcycle came true. “My older cousin gave me a Triumph Tiger Cub that didn’t run. He told me I could have it if I could fix it. We brought it home and pushed it up and down the streets for a month trying to get it started. It finally started when it was my turn to “ride” it. It must have been a fuel issue, as carburetors get gummed up. Once we got it started, my mother told me it had to go!”

At 14, Clive and his family emigrated from England to Alberta. To Clive’s delight he discovered being 14 meant he could get a motorcycle licence. He bought a Honda CB 100, then a 1976 Suzuki GS750.

Clive’s love of classic bikes is entrenched into his life. “While I love super high-tech bikes, the appeal of the classics is that they aren’t high-tech. They have carburetors and points and if something happens to them I can fix them at the side of the road.”

While he has plenty of classic motorcycles to enjoy, there’s still one that he’d like to get. “My most desired motorcycle is a 1937 Rudge. It was prewar so it had a girder front end with a huge headlight. They’re so classic and unique in the way they were constructed and engineered. It had linked brakes which was unheard of until they were subsequently introduced in the Goldwing.”

Three classics Clive is particularly fond of are his: Jawa Perak, Chang Jiang and FZR250 Yamaha.

“The Jawa Perak has the best history,” Clive said. “The prototype was manufactured and 20,0000 km put on it during the Nazi occupation of Czechoslovakia during WWII. They weren’t allowed to work on anything that wasn’t related to the Nazi war effort. The Czechs, right under the noses of the Nazis, engineered this 250 cc dual exhaust port two stroke motorcycle. They got away with it by putting a fake SS licence plate on the back. When stopped, they told the guards it was a secret SS project. They named the bike Perak, which has two meanings: mythical super hero or a cell of freedom fighters. The motor is a work of art, very art deco to look at. Gearheads see it as a thing of beauty. The bike was introduced in 1948 at the World’s Fair and took the gold medal.”

The Chang Jiang came to Clive partially restored. “These motorcycles are assembled in China from a huge inventory of parts. The Chinese government had set up factories to just have people make things. In many cases they were way overproduced. Once they stopped producing parts, some independents started purchasing them and putting motorcycles together.”

The actual manufactured year of Chang Jiangs are a grey area. “Mine is registered as a 1968 motorcycle, but it could have been put together a few years ago from 1968 parts,” Clive explained. “The vast majority you will see are a compilation of parts put together by independent companies in China. The Chinese government has now put a stop to their export.”

The name Chang Jiang means long river and is named after the Yangtze River. “Most of them came with sidecars although some can be purchased without,” Clive said. “They have a reputation for being incredibly unreliable. However, I toured northern WA with my wife, fully loaded, and it never broke down. The key is preventative maintenance. You have to play with them. I spend two days checking everything and during the trip I check it again at least once a day.”

Then there’s Clive’s newest classic, the 1988 FZR250 Yamaha. “This was a Japanese market motorcycle with an EXUP (electronically controlled) exhaust. This one still has that in pristine condition. It redlines at 18,000 RPM. It’s a race bike for the street.”

JAWA PERAK

Year: 1953

Make: Jawa

Model: Perak 250

Mileage: 3,400 km since restoration

Motor: single cylinder with dual port

250 CC two stroke.

Restoration: Absolutely everything was restored, every nut and bolt.

Manufactured: 1948 to 1954 in Czechoslovakia

CHANG JIANG

Year: 1968

Make: Chang Jiang CJ750

Model: M1S

Mileage: 11,000 km – original mileage

Motor: Boxer 750 CC – 12 volt with overhead valves with reverse.

Looks like a BMW motor

Restoration:

Mostly cosmetic restoration including, seat, handle bar and controls, wheels carburetor, minor cosmetics/nuts/bolts restored. Side car somewhat restored on the interior and the windshield. All lighting upgraded to LED.

Manufactured: early 1960s in China, ceased assembling around 2018

YAMAHA

Year: 1988

Make: Yamaha

Model: FZR250

Mileage: 18,000 original km

Motor: 250 CC, 4 cylinder, 4 stroke

Restoration: Bike is basically all original

Manufactured: This exact model made only in 1988 in Japan

From West Shore Life + Style magazine

LifeLifestylemotorcycle

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

A man wearing a face mask to prevent the spread of COVID-19 walks past a mural in Vancouver on Monday, Nov. 30, 2020. THE CANADIAN PRESS/Marissa Tiel
212 new COVID-19 cases in Interior Health over the weekend

A total of 490 cases remain active; 15 in hospital

Photo:  Black Press Media
Greater Trail RCMP urge locals to stay off the roads

By noon there were four commercial tractor trailers stuck on hills in the Trail area

Katrine Conroy’s swearing in ceremony. Photo: Kootenay West Katrine Conroy Facebook
Forestry Minister West Kootenay MLA Katrine Conroy talks about her new role

Conroy will also oversee Columbia Basin Trust, Columbia Power Corporation and Columbia Basin Treaty

RNG plant
Construction on ground-breaking RNG plant in Fruitvale set to go in spring 2021

REN Energy partners with Calgary engineering firm for innovative West Kootenay gas plant

Seven Deers carved Shinning Raven Woman out of Labradorite harvested from the Canadian Shield. Photo: Laurie Tritschler
Sculpture by Indigenous artist to be erected in Grand Forks

Civic leaders have rallied behind the project by Grand Forks’ David Seven Deers

Fossil finds at Mt. Stephen. (Photo: Sarah Fuller/Parks Canada)
Extreme hiking, time travel and science converge in the Burgess Shale

Climb high in the alpine and trace your family tree back millions of years – to our ocean ancestors

Kettle bells sit aligned in an indoor fitness studio. (PIxabay.com)
1 COVID-19 case at a B.C. fitness studio leads to 104 more infections, 6 school exposures

According to case data released by Fraser Health, one case of the novel coronavirus carries a big impact

Cannabis bought in British Columbia (Ashley Wadhwani/Black Press Media)
Is it time to start thinking about greener ways to package cannabis?

Packaging suppliers are still figuring eco-friendly and affordable packaging options that fit the mandates of Cannabis Regulations

Vehicles drive past a display thanking essential workers in Burnaby, B.C. on Sunday, Nov. 29, 2020. THE CANADIAN PRESS/Marissa Tiel
B.C. changing COVID-19 case reporting as virus spread continues

Manual counting takes more time, leads to errors

Black Press Media and BraveFace have come together to support children facing life-threatening conditions. Net proceeds from these washable, reusable, three-layer masks go to Make-A-Wish Foundation BC & Yukon.
Put on a BraveFace: Mask fundraiser helps make children’s wishes come true

From Black Press Media + BraveFace – adult, youth and kid masks support Make-A-Wish Foundation

Christy Jordan-Fenton is the co-author of the book Fatty Legs, which has been mentioned amid the controversy of an Abbotsford school assignment on residential schools.
Co-author of residential schools book condemns controversial Abbotsford class assignment

Children’s book mentioned amid controversy at W. A. Fraser Middle School

Kootenay East MLA Tom Shypitka takes over as energy and mines critic for the B.C. Liberal opposition. Kelowna-Lake Country MLA Norm Letnick (right) moves from health critic to assistant deputy speaker. (Hansard TV)
B.C. Liberals pick critics to take on Horgan’s NDP majority

Interim leader Shirley Bond takes seniors, long-term care

Deputy Prime Minister and Minister of Finance Chrystia Freeland listens to a question from a reporter on the phone during a news conference in Ottawa, Monday, Nov. 30, 2020. THE CANADIAN PRESS/Adrian Wyld
Spending too little worse than spending too much, Freeland says as Canada’s deficit tops $381B

‘The risk of providing too little support now outweighs that of providing too much’

Most Read