Medical care robots being made with 3D origami in B.C. lab

The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)
This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)

A B.C. professor would like to see a robot take your vitals when you visit a doctor in the somewhat near future.

Dr. Woo Soo Kim, associate professor of mechatronic systems engineering at Simon Fraser University, has developed health care robots that can measure heart rate, respiration rate, temperature and oxygen levels. The oxygen level measurement in particular could be used to monitor severe COVID-19 patients.

He hopes the sensor robots can support doctors and nurses, and is currently using two prototypes to collaborate with a team of Vancouver Coastal Health researchers on how a technology like this could be applied in practice.

There’s a lot to be worked out — including how comfortable will patients be receiving care from a robot – but Kim hopes to have sensing robots in health care in five to 10 years. He imagines a full complement of medical care robots, including passive bots that take vitals, companion bots that would hang out with patients to regularly monitor vitals so people don’t need to wear an uncomfortable device, and even receptionist bots.

We might already be warming up to machine-based medical care, as a recent report indicated most British Columbians now prefer virtual meetings with their doctors for routine check ups.

READ MORE: Majority of British Columbians now prefer routine virtual doctor’s visits: study

His lab, Additive Manufacturing in SFU’s Surrey campus, has been working on advanced 3D printing, wearable technology and sensing robots since he arrived in 2010, and narrowed their focus health care uses in 2018. He works with six to seven students and interns.

Now they have two working prototypes to take to doctors and nurses. One is an arm, completely made in the lab with 3D printed origami. The second machine is a shiny, white humanoid that Kim’s lab has added on their own hand with highly specialized electron sensors.

The origami design was chosen not just because it’s cool. His lab has spent years testing various architectural solids with 3D printing, and found that “3D origami structures have naturally less fatigue characteristics with re-configurable structures. So, it’s good if they are used for bending structures such as our fingers,” Kim said.

Funding has been partially provided by the Natural Sciences and Engineering Research Council of Canada, and the lab is applying for more grants to expand development.

The first stage of robotic health care is passive, with the machines gathering information and sharing results with human health care professionals, but Kim envisions future machines that could be more involved.

Do you have something to add to this story or something else we should report on? Email: zoe.ducklow@blackpress.ca


BC HealthScience

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

FILE — In this March 31, 2021 file photo, a nurse fills a syringe with a dose of the Johnson & Johnson’s one-dose COVID-19 vaccine at the Vaxmobile, at the Uniondale Hempstead Senior Center, in Uniondale, N.Y. The U.S. is recommending a “pause” in administration of the single-dose Johnson & Johnson COVID-19 vaccine to investigate reports of potentially dangerous blood clots. In a joint statement Tuesday, the Centers for Disease Control and Prevention and the Food and Drug Administration said it was investigating clots in six women in the days after vaccination, in combination with reduced platelet counts. (AP Photo/Mary Altaffer, File)
72 new COVID-19 cases in Interior Health

This brings the total number of cases in the region to 9,666 since the pandemic began

Police are advising of a scam actively happening in the Kootenay Boundary, one that involves a person trying to sell the victim gold for cash. Problem is, the gold is fake. Photo: Matt Flores on Unsplash
Fake gold scam re-surfaces in the Kootenay Boundary

Victims are approached in high-traffic areas by someone claiming to need emergency cash

Giant prize-winning pumpkins and squash are standard fare at the Pass Creek Fall Fair. Photo: Betsy Kline
Pass Creek Fall Fair cancelled for 2021

Event cancelled for second time

File photo
Help clean up Castlegar during Pitch-In week

Annual clean-up to take place April 18 - 26

RCMP. (Phil McLachlan/Capital News)
Restaurant patrons enjoy the weather on a patio in Vancouver, B.C., Monday, April 5, 2021. The province has restricted indoor dining at all restaurants in B.C. due to a spike in COVID-19 numbers. THE CANADIAN PRESS/Jonathan Hayward
B.C.’s COVID-19 indoor dining, drinking ban extending into May

Restaurant association says patio rules to be clarified

B.C. Premier John Horgan speaks at the B.C. legislature. (B.C. government)
Tougher COVID-19 restrictions in B.C., including travel, still ‘on the table’: Horgan

John Horgan says travel restrictions will be discussed Wednesday by the provincial cabinet

Protesters occupied a road leading to Fairy Creek Watershed near Port Renfrew. (Submitted photo)
B.C. First Nation says logging activist interference not welcome at Fairy Creek

Vancouver Island’s Pacheedaht concerned about increasing polarization over forestry activities

Flow Academy is not accepting membership applications from anybody who has received a dose of the vaccine, according to a password-protected membership application form. (Submitted image)
B.C. martial arts gym refusing patrons who have been vaccinated, wear masks

Interior Health has already issued a ticket to Flow Academy for non-compliance with public health orders

Cannabis bought in British Columbia (Ashley Wadhwani/Black Press Media)
Is it time to start thinking about greener ways to package cannabis?

Packaging suppliers are still figuring eco-friendly and affordable packaging options that fit the mandates of Cannabis Regulations

Guinevere, lovingly referred to by Jackee Sullivan and her family as Gwenny, is in need of a gynecological surgery. The family is raising money to help offset the cost of the procedure. (Jackee Sullivan/Special to Langley Advance Times)
Langley lizard’s owners raise funds for gynecological surgery

The young reptile is scheduled for operation on Tuesday

Facebook screenshot of the sea lion on Holberg Road. (Greg Clarke Facebook video)
VIDEO: Sea lion randomly spotted on remote B.C. logging road

Greg Clarke was driving home on the Holberg Road April 12, when he saw a large sea lion.

Defence counsel for the accused entered two not guilty pleas by phone to Grand Forks Provincial Court Tuesday, Jan. 12. File photo
B.C. seafood company owner fined $25K for eating receipt, obstructing DFO inspection

Richmond company Tenshi Seafood is facing $75,000 in fines as decided March 4 by a provincial court judge

B.C. Finance Minister Selina Robinson speaks in the B.C. legislature, March 2, 2021. (Hansard TV)
B.C. NDP ministers defend ‘air tax,’ latest COVID-19 business aid

Empty home tax doesn’t apply to businesses, but space above them

Most Read